标王 热搜: 五金  镀锌  酸铜  镀镍  镀铜  镀铬  三价铬  镀金  镀银  配方 
 
当前位置: 首页 » 技术 » 科技文献 » 正文

Preparation and characterization of BaMgAl10O17:Eu phosphor coated with MgFz by sol-gel process

放大字体  缩小字体 发布日期:2012-05-11  浏览次数:305   关注:加关注
核心提示:Preparation and characterization of BaMgAl10O17:Eu phosphor coated with MgFz by sol-gel process

摘 要:In order to prevent BaMgAl10O17: Eu (BAM) phosphor from thermal degradation, MgF2-coatings on the surface of BAM were prepared by a sol-gel process. The coatings were characterized by X-ray photoelectron spectroscopy and scanning electron microscopy. The results indicate that BAM is successfully coated with homogenous, close MgF2 coatings. The photoluminescence and anti-thermal degradation properties of coated BAM were investigated under 254 and 147 nm excitations. The optimum anti-thermal degradation properties are obtained at the mass ratio of MgF2 to BAM 0. 2% under 254 nm excitation and 0. 5% under 147 nm excitation, respectively. It is considered that trace MgO formed after baked would cause different optimum coating thicknesses under 254 and 147 nm excitations.

Preparation and characterization of BaMgAl10O17:Eu phosphor coated with MgFz by sol-gel process.pdf
 

分享到:
 
 
[ 技术搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]
 

 
点击排行
推荐技术
推荐图文
 
网站首页 | 关于我们 | 联系方式 | 使用协议 | 版权隐私 | 网站地图 | 排名推广 | 网站留言 | RSS订阅
                 »¦¹«θ±¸ 310100103613